Armoured Standard PVC Power Cable

  • Conductor:

    Copper

  • Insulation:

    PVC,

  • Insulation Color:

    Black

  • Temperature Range:

    -10°C to 90°C

  • Nominal Voltage:

    600/1000V

  • Test Voltage:

    More than 1000V

  • Standard:

    CE/ROHS/ISO9001

 1. Application

For use in ducts, trays and direct burial in ground. The cable is subject to immerse in water all the time.

 

2. Construction

-Conductor: Solid or stranded copper

-Insulation: Cross-linked polyethylene( XLPE or PVC)

-Circuit Identification: The insulation shall be red, black

-Filler: Polypropylene lament with lapped binding tape

-Inner Sheath: Polyvinyl chloride (Black)

-Armor: Galvanized steel wire

-Core-covering: Binding tape

-Outer Sheath: Polyvinyl chloride (Black)

 

3. Standard

The products are mainly complying with IEC 60502 standard, also can be produced according to OEM requirements and other standards, such as BS standard, din standard, ASTM standard, etc.  

 

4. Installation

This cable can be installed in duct, tray or direct burial. It is recommended that the installation instructions indicated by the Local Electric Code, or any equivalent, be followed,so that the safeguarding of persons and the integrity of the product will not be affected by eciencies in the installation.

 

5. Voltage grade is up to 35kv.

 

6. cross-section area can be up to 400 sqmm (copper or aluminium conductor).

 

7. Conductor long-time operating temperature is 90 degrees.

In short circuit, conductor highest temperature should be not more than 250 degrees.

 

 8. Laying conditions: For lying under ground with large different altitude, be able to bear external mechanical force and moderate pulling force


 

Factory Show:

 

 

 

Technical Team

 



Inquiry

InquiryPlease fill in your procurement needs and contact information
  • Name:
  • *Email:
  • * Content: